Weslo Cadence G25 Treadmill – WLTL19105.2 / WLTL191052
Click on the part / diagram number to view and add to cart.
If the number does not highlight please check the table below the diagram to see if your part is listed. All parts in the table should have a corresponding diagram number. If your part is not listed at all please Click Here
55 Parts Available for Weslo Cadence G25 Treadmill - WLTL19105.2 / WLTL191052 ↓
| Image | Part # | Diagram # | Title | Price | Details | |
|---|---|---|---|---|---|---|
![]() | 186819 | 5 | 1/2″ SCREW | $0.99 | ||
| 226329 | 6 | HB,2 BEND,RT,CMPNT 226330- | $59.49 | |||
| 125283 | 8 | Endcap | NLA | |||
| 142276 | 9 | LIFT FRAME BOLT | $1.99 | |||
| 118522 | 10 | 6-Inch Screw | NLA | |||
| 155120 | 13 | WHEEL SPACER | NLA | |||
![]() | 139090 | 15 | WHEEL | $2.99 | ||
![]() | 119425 | 17A | LOCK NUT | $0.99 | ||
| 196829 | 18 | BELLY PAN GROMMET | $2.49 | |||
| 155030 | 19 | BASE PAD | $1.99 | |||
| 210522 | 20 | ELECTRONIC SCREW | $0.99 | |||
| 256836 | 21 | Warning Decal | NLA | |||
| 226829 | 22 | WIRE HARNESS | ||||
![]() | 013300 | 24 | 3/4″ SCREW | $0.99 | ||
| 013129 | 26 | M4 x 16mm Screw | NLA | |||
![]() | 198639 | 27 | BELT GUIDE | $5.99 | ||
| 163160 | 28 | ROLLER SPACER | NLA | |||
![]() | 186726 | 30 | RESET/OFF CIRCUIT BREAKER | $22.49 | ||
| 238759 | 32 | CONTROLLER BRACKET | NLA | |||
![]() | 014117 | 33 | STAR WASHER | $0.99 | ||
| 014087 | 34 | FLAT WASHER | $0.99 | |||
| 107503 | 36 | Motor Bolt | NLA | |||
| 120867 | 38 | MOTOR TENSION NUT | $2.49 | |||
| 147321 | 39 | MOTOR STAR WASHER | $0.99 | |||
| 122812 | 40 | MOTOR TENSION WASHER | $0.99 | |||
| 236682 | 43 | MOTOR ASSEMBLY | $183.99 | |||
| 155353 | 45 | LATCH WARNING DECAL | $64.99 | |||
![]() | 185207 | 46 | REED SWITCH | $27.49 | ||
| 116927 | 47 | TIE CLAMP | $0.99 | |||
![]() | 131090 | 48 | REED SWITCH CLIP | $0.99 | ||
![]() | 113842 | 49 | MAGNET | $1.49 | ||
| 155048 | 50 | BELT,V4,STD,21″L,J-SEC | NLA | |||
| 100606 | 51 | 1/4″ X 3″ Screw | NLA | |||
| 157498 | 52 | REAR PLATFORM SCREW | $0.99 | |||
| 171462 | 53 | Drive Roller for ProForm 1.6 | $145.99 | |||
![]() | 146427 | 58 | #8 X 1″ TEK SCREW | $0.99 | ||
| 155433 | 60 | ROLLER GROUND WIRE | $2.49 | |||
| 016057 | 61 | 8″ CABLE TIE | $2.99 | |||
| 124695 | 62 | Power Cord Grommet | NLA | |||
| 228596 | 63 | TUBE,LIFT,INNER,CMPNT | $13.99 | |||
| 132317 | 64 | Incline Pin | NLA | |||
| 234870 | 65 | Console Warning Decal | NLA | |||
![]() | 014063 | 66 | ISOLATOR WASHER | $0.99 | ||
| 202561 | 68 | FRAME U-NUT | $4.99 | |||
![]() | 013322 | 70 | SCREW | $0.99 | ||
| 226316 | 71 | Base Component | $115.49 | |||
![]() | 177655 | 72 | RLR,IDLER,ARPS,1.6 | |||
![]() | 012149 | 73 | LATCH SHOCK NUT | $0.99 |















