WESLO CADENCE DL15 TREADMILL – WLTL4158.3
Click on the part / diagram number to view and add to cart.
If the number does not highlight please check the table below the diagram to see if your part is listed. All parts in the table should have a corresponding diagram number. If your part is not listed at all please Click Here
61 Parts Available for WESLO CADENCE DL15 TREADMILL - WLTL4158.3 ↓
| Image | Part # | Diagram # | Title | Price | Details | |
|---|---|---|---|---|---|---|
| 186689 | 1 | MOTOR BELT | $51.49 | |||
| 112825 | 3 | PULY/FLWH/FAN | $80.49 | |||
| 013547 | 6 | INCLINE MOTOR BOLT | $0.99 | |||
| 122812 | 7 | TENSION WASHER | $0.99 | |||
 | 014117 | 8 | STAR WASHER | $0.99 | ||
| 120867 | 9 | MOTOR PIVOT NUT | $2.49 | |||
| 129168 | 10 | DECK SCREW | $0.99 | |||
| 116926 | 16 | 50LB CABLE TIE | $0.99 | |||
| 139429 | 20 | 2 lb Weight | $19.99 | |||
| 116927 | 21 | CABLE TIE CLAMP | $0.99 | |||
| 136728 | 24 | #8 X 7/16″ SCREW | $0.99 | |||
| 147458 | 30 | LEFT HANDRAIL | $68.49 | |||
| 147462 | 32 | RIGHT HANDRAIL | $68.49 | |||
| 126960 | 33 | HOLE PLUG | $0.99 | |||
 | 012056 | 37 | ENDCAP NUT | $0.99 | ||
| 132314 | 39 | WHEEL | $1.49 | |||
| 126650 | 41 | BUMPER | $0.99 | |||
 | 013300 | 42 | #8 X 3/4″ TEK SCREW | $0.99 | ||
| 103833 | 45 | POST CAP | $3.49 | |||
 | 129004 | 46 | ROUND GROMMET | $1.99 | ||
| 120630 | 48 | GROUND/CONTROLLER SCREW | $0.99 | |||
| 125677 | 53 | HOOD MOUNT (SIDE) | $1.99 | |||
 | 109382 | 54 | CIRCUIT BREAKER | $15.99 | ||
| 146696 | 57 | ELECTRONICS BRACKET | $18.99 | |||
| 185582 | 58 | CHOKE | $76.99 | |||
 | 012149 | 60 | 3/8″ NUT | $0.99 | ||
| 016057 | 61 | 8″ CABLE TIE | $2.99 | |||
 | 131090 | 62 | REED SWITCH CLAMP | $0.99 | ||
 | 113842 | 65 | MAGNET | $1.49 | ||
 | 149701 | 67 | WALKING BELT W/FASTENER | $101.49 | ||
 | 138853 | 71 | HANDRAIL COVER FASTENER | $0.99 | ||
| 198640 | 72 | BELT GUIDE | $25.49 | |||
| 178207 | 73 | BELLY PAN | $79.99 | |||
| 014087 | 80 | UPRIGHT WASHER | $0.99 | |||
| 130426 | 82 | FRONT ROLLER GROUND WIRE | $2.49 | |||
| 132401 | 83 | WIRE CLIP | $0.99 | |||
 | 121576 | 84 | 1/4″ NUT | $2.49 | ||
 | 133845 | 85 | REAR ROLLER | $130.99 | ||
 | 105444 | 87 | REAR ROLLER ADJ SCREW | $0.99 | ||
| 349204 | 92 | DECAL,GENERAL WRNG,6 LANG | $43.99 | |||
| 137393 | 93 | LONG BELLY PAN SCREW | $0.99 | |||
| 147637 | 95 | ISOLATOR | $12.99 | |||
 | 013576 | 97 | #8 X 1/2″ SCREW | $0.99 | ||
| 123945 | # | TECH SHEET ENVELOPE | $0.99 | |||
| 163889 | # | RAIL WARNING DECAL | $30.49 | |||
 | 356520 | # | MAINTENANCE KIT | $62.49 | ||
 | 013607 | # | #8X3/4″ TRUSS HEAD SCREW | $0.99 | ||
 | 219170 | # | LUBE KIT, 3 TUBE | $39.49 | ||
| 103823 | # | 14″ WHITE WIRE, M/F | $5.49 | |||
| 141995 | # | 8″ BLACK WIRE, M/F | $4.49 | |||
| 147468 | # | TECH SHEET | $0.99 | |||
| 127860 | # | FASTENER | $0.99 | |||
 | 119425 | . | 3/8″ JAM NUT | $0.99 | ||
| 155909 | . | USER’S MANUAL | $9.49 | |||
 | 119038 | . | KEY/CLIP | $5.49 | ||
 | 014132 | . | FRAME PIVOT WASHER | $0.99 | ||
| 013601 | . | MOTOR TENSION BOLT | $8.99 | |||
 | 128457 | . | 3/16-7/32″ ALLEN WRENCH | $25.49 | ||
 | 014063 | . | 1/4″ FLAT WASHER | $0.99 | ||
| 119445 | . | WHEEL HOUSING SCREW | $0.99 | |||
 | 013322 | . | #8 X 3/4″ SCREW | $0.99 |
