Weider Pro 7500 Bench – 15968.0 / 159680
Click on the part / diagram number to view and add to cart.
If the number does not highlight please check the table below the diagram to see if your part is listed. All parts in the table should have a corresponding diagram number. If your part is not listed at all please Click Here
35 Parts Available for Weider Pro 7500 Bench - 15968.0 / 159680 ↓
| Image | Part # | Diagram # | Title | Price | Details | |
|---|---|---|---|---|---|---|
| 386045 | 1 | Right Base | $322.99 | |||
| 386006 | 2 | Left Base | $322.49 | |||
| 386172 | 3 | Right Front Upright | NLA | |||
| 386046 | 4 | Left Front Upright | $326.49 | |||
| 386047 | 5 | RIGHT REAR UPRIGHT | $293.49 | |||
| 386009 | 6 | Left Rear Upright | $277.49 | |||
| 386048 | 7 | Crossbar | NLA | |||
| 386010 | 8 | Pull-Up Bar | NLA | |||
| 386016 | 9 | RIGHT WEIGHT REST | $149.99 | |||
| 119217 | 10 | 4-Inch Plastic Pivot Bushing | NLA | |||
| 386015 | 10 | Left Weight Rest | $165.49 | |||
| 386018 | 11 | RIGHT SPOTTER | $200.49 | |||
| 386017 | 12 | LEFT SPOTTER | NLA | |||
| 386019 | 13 | SUPPORT PLATE | $83.99 | |||
| 386011 | 14 | STORAGE TUBE | $69.99 | |||
| 386020 | 15 | Large Round Cap | $12.99 | |||
| 223132 | 16 | WEIGHT BUMPER | $16.99 | |||
| 112560 | 17 | PLASTIC GRIP, 1″ID X 5″L | $2.99 | |||
| 386021 | 17 | SQUARE CAP | $17.99 | |||
| 386022 | 18 | SMALL ROUND CAP | $3.49 | |||
| 225420 | 19 | M10 X 95MM BOLT | $24.49 | |||
 | 248340 | 20 | M10 WASHER | $0.99 | ||
 | 275907 | 21 | M10 LOCKNUT | $4.49 | ||
 | 373258 | 22 | M10 X 20MM BOLT | $5.49 | ||
 | 177034 | 23 | M10 SPLIT WASHER | $1.49 | ||
 | 103805 | 28 | LEG LEVER FOAM PAD (103805) | $28.99 | ||
 | 230475 | 33 | SMALL PULLEY | $70.99 | ||
| 012082 | 41 | 5/16″ LOCKNUT | $0.99 | |||
| 113744 | 43 | 5/16 X 2 3/4″ Bolt | NLA | |||
| 113814 | 49 | MOTOR BOLT | $0.99 | |||
| 105495 | 50 | 3/8″ WASHER | $0.99 | |||
| 012108 | 51 | NUT | $0.99 | |||
| 013564 | 53 | 3/8″ X 1.75″ Bolt | NLA | |||
| 013580 | 54 | FRAME BOLT | $1.99 | |||
 | 103053 | 56 | MOTOR BOLT | $0.99 | ||
| 013231 | 57 | 5/16″ X 3 1/2″ BOLT | $2.49 | |||
| 013211 | 58 | MOTOR FRAME BOLT | $0.99 | |||
| 014127 | 60 | ROLLER ADJUSTMENT WASHER | $0.99 | |||
 | 012090 | 61 | 1/4″ NUT | $0.99 | ||
| 113666 | 71 | BASE CAP | $1.99 | |||
 | 120733 | 72 | 25MM ROUND INNER CAP | $2.49 | ||
| 120808 | 73 | 1″ PLASTIC ENDCAP | $1.99 | |||
| 103833 | 75 | POST CAP | $3.49 | |||
| 115366 | 76 | 3/4″ RND INT ENDCAP | $0.99 | |||
| 108778 | 78 | BRACKET RETAINER | $0.99 | |||
 | 115644 | 80 | BUMPER | $1.49 | ||
| 013028 | 81 | #8 X 1″ TRUSS HD SCREW | $0.99 | |||
| 119192 | 88 | Threaded Knob | NLA | |||
| 204031 | 96 | WIDE V-PULLEY | NLA | |||
| 116868 | 99 | CHAIN | $16.49 | |||
| 115177 | 101 | HANDLE | $56.49 | |||
 | 103087 | 102 | CLIP | $20.99 | ||
| 104049 | 106 | 3/8″ X 3.5″ SCREW | $2.49 | |||
| 103045 | 108 | 3/8″ X 2.5″ SCREW | $2.49 | |||
| 104925 | 109 | PIVOT BOLT | NLA | |||
| 101278 | 111 | 5/16″ X 3″ BOLT | $1.49 | |||
| 119222 | 115 | FLYWHEEL SPACER | $2.99 | |||
| 146119 | # | FLOOR MAT | $79.99 | |||
| 253213 | # | DECAL, MAX WEIGHT | $8.49 | |||
| 379820 | # | DECAL,WRNG,LIFT BAR | $2.99 | |||
| 386099 | # | Exercise Chart | $6.99 | |||
| 379818 | # | DECAL,WRNG,STOP CATCHES | $0.99 | |||
| 304738 | # | DECAL, GENERAL WARNING | $3.49 | |||
| 379819 | # | DECAL,WRNG, STOP CATCHES | $0.99 |
