Weider Pro 495 Bench – WEBE1710.0 / WEBE17100
Click on the part / diagram number to view and add to cart.
If the number does not highlight please check the table below the diagram to see if your part is listed. All parts in the table should have a corresponding diagram number. If your part is not listed at all please Click Here
28 Parts Available for Weider Pro 495 Bench - WEBE1710.0 / WEBE17100 ↓
| Image | Part # | Diagram # | Title | Price | Details | |
|---|---|---|---|---|---|---|
| 115366 | 9 | 3/4″ RND INT ENDCAP | $0.99 | |||
| 163105 | 10 | PAD TUBE | $23.49 | |||
| 120696 | 12 | UPRIGHT CAP | $4.49 | |||
 | 012042 | 13 | M8 NYLON LOCKNUT | $1.99 | ||
| 144781 | 14 | M10 SCREW | $15.99 | |||
| 137337 | 15 | M6 X 16MM PAN HEAD SCREW | $3.49 | |||
 | 140739 | 16 | M6 X 38MM SCREW | $2.99 | ||
| 133758 | 17 | M10 X 175MM BOLT | $23.49 | |||
| 132889 | 18 | M10 X 63MM BOLT | $12.99 | |||
 | 148710 | 19 | M10 NUT | $2.49 | ||
| 150514 | 21 | 45MM SQUARE INT ENDCAP | $2.99 | |||
 | 208378 | 22 | FOAM PAD | $28.99 | ||
 | 014132 | 24 | 3/8″ WASHER | $0.99 | ||
 | 014063 | 25 | 1/4″ WASHER | $0.99 | ||
 | 159934 | 29 | 110MM PULLEY | $60.49 | ||
 | 103087 | 33 | CLIP | $20.99 | ||
 | 162910 | 38 | 50MM SQUARE INNER CAP | $11.99 | ||
| 130302 | 43 | M10 X 81MM BOLT | $26.49 | |||
| 161444 | 44 | 50mm Square Internal Endcap | NLA | |||
| 116824 | 45 | PEDAL ARM CAP | NLA | |||
 | 373258 | 46 | M10 X 20MM HEX SCREW | $5.49 | ||
| 014073 | 48 | 5/16″ FLAT WASHER | $1.49 | |||
| 134366 | 49 | M8 X 57MM BOLT | $5.49 | |||
| 123396 | 50 | 25MM ROUND ANGLED CAP | $2.49 | |||
| 112560 | 51 | HANDGRIP | $2.99 | |||
| 132651 | 53 | M10 X 70MM BOLT | $15.99 | |||
| 013374 | 54 | M8 X 70MM BOLT | $7.49 | |||
| 013356 | 56 | M5 x 16mm Screw | NLA |
