Weider Pro 7500 Bench – 15968.0 / 159680
Click on the part / diagram number to view and add to cart.
If the number does not highlight please check the table below the diagram to see if your part is listed. All parts in the table should have a corresponding diagram number. If your part is not listed at all please Click Here
65 Parts Available for Weider Pro 7500 Bench - 15968.0 / 159680 ↓
| Image | Part # | Diagram # | Title | Price | Details | |
|---|---|---|---|---|---|---|
| 386045 | 1 | Right Base | $322.99 | |||
| 386006 | 2 | Left Base | $322.49 | |||
| 386172 | 3 | Right Front Upright | NLA | |||
| 386046 | 4 | Left Front Upright | $326.49 | |||
| 386047 | 5 | RIGHT REAR UPRIGHT | $293.49 | |||
| 386009 | 6 | Left Rear Upright | $277.49 | |||
| 386048 | 7 | Crossbar | NLA | |||
| 386010 | 8 | Pull-Up Bar | NLA | |||
| 386016 | 9 | RIGHT WEIGHT REST | $149.99 | |||
| 119217 | 10 | 4-Inch Plastic Pivot Bushing | NLA | |||
| 386015 | 10 | Left Weight Rest | $165.49 | |||
| 386018 | 11 | RIGHT SPOTTER | $200.49 | |||
| 386017 | 12 | LEFT SPOTTER | NLA | |||
| 386019 | 13 | SUPPORT PLATE | $83.99 | |||
| 386011 | 14 | STORAGE TUBE | $69.99 | |||
| 386020 | 15 | Large Round Cap | $12.99 | |||
| 223132 | 16 | WEIGHT BUMPER | $16.99 | |||
| 112560 | 17 | HANDGRIP | $2.99 | |||
| 386021 | 17 | SQUARE CAP | $17.99 | |||
| 386022 | 18 | SMALL ROUND CAP | $3.49 | |||
| 225420 | 19 | M10 X 94MM BOLT | $24.49 | |||
 | 248340 | 20 | M10 WASHER | $0.99 | ||
 | 275907 | 21 | M10 LOCKNUT,CRNK ARM CLMP | $4.49 | ||
 | 373258 | 22 | M10 X 20MM HEX SCREW | $5.49 | ||
 | 177034 | 23 | M10 SPLIT WASHER | $1.49 | ||
 | 103805 | 28 | LEG LEVER FOAM PAD (103805) | $28.99 | ||
 | 230475 | 33 | 3 1/2″ PULLEY | $70.99 | ||
| 012082 | 41 | TENSION/SPRING FOOT NUT | $0.99 | |||
| 113744 | 43 | 5/16 X 2 3/4″ Bolt | NLA | |||
| 113814 | 49 | MOTOR BOLT | $0.99 | |||
| 105495 | 50 | M8 WASHER | $0.99 | |||
| 012108 | 51 | NUT | $0.99 | |||
| 013564 | 53 | 3/8″ X 1.75″ Bolt | NLA | |||
| 013580 | 54 | 3/8″ X 2″ SCREW | $1.99 | |||
| 103053 | 56 | MOTOR BOLT | $0.99 | |||
| 013231 | 57 | 5/16″ X 3 1/2″ BOLT | $2.49 | |||
| 013211 | 58 | MOTOR FRAME BOLT | $0.99 | |||
| 014127 | 60 | ADJUSTMENT WASHER | $0.99 | |||
 | 012090 | 61 | 1/4″ NUT | $0.99 | ||
| 113666 | 71 | 1 3/4″ X 1 3/4″ ENDCAP | $1.99 | |||
 | 120733 | 72 | 1″ RND INT ENDCAP | $2.49 | ||
| 120808 | 73 | 1″ PLASTIC ENDCAP | $1.99 | |||
| 103833 | 75 | BASE ENDCAP | $3.49 | |||
| 115366 | 76 | 3/4″ RND INT ENDCAP | $0.99 | |||
| 108778 | 78 | 1″ RETAINER | $0.99 | |||
 | 115644 | 80 | BUMPER | $1.49 | ||
| 013028 | 81 | #8 X 1″ SCREW | $0.99 | |||
| 119192 | 88 | Threaded Knob | NLA | |||
| 204031 | 96 | WIDE V-PULLEY | NLA | |||
| 116868 | 99 | CHAIN | $16.49 | |||
| 115177 | 101 | STRAP | $56.49 | |||
 | 103087 | 102 | CLIP | $20.99 | ||
| 104049 | 106 | 3.5″ BOLT | $2.49 | |||
| 103045 | 108 | 3/8″ X 2.5″ SCREW | $2.49 | |||
| 104925 | 109 | PIVOT BOLT | NLA | |||
| 101278 | 111 | 5/16″ X 3″ BOLT | $1.49 | |||
| 119222 | 115 | 1″L SPACER | $2.99 | |||
| 146119 | # | FLOOR MAT | $79.99 | |||
| 253213 | # | DECAL, MAX WEIGHT | $8.49 | |||
| 379820 | # | DECAL,WRNG,LIFT BAR | $2.99 | |||
| 386099 | # | Exercise Chart | $6.99 | |||
| 379818 | # | DECAL,WRNG,STOP CATCHES | $0.99 | |||
| 304738 | # | DECAL, GENERAL WARNING | $3.49 | |||
| 379819 | # | DECAL,WRNG, STOP CATCHES | $0.99 |
