Weider Pro 255 L Bench – WEBE49310.0 / WEBE493100
Click on the part / diagram number to view and add to cart.
If the number does not highlight please check the table below the diagram to see if your part is listed. All parts in the table should have a corresponding diagram number. If your part is not listed at all please Click Here
36 Parts Available for Weider Pro 255 L Bench - WEBE49310.0 / WEBE493100 ↓
| Image | Part # | Diagram # | Title | Price | Details | |
|---|---|---|---|---|---|---|
| 252726 | 1 | Frame | $111.49 | |||
| 252729 | 2 | Front Leg | $61.99 | |||
| 252728 | 3 | Rear Leg | $147.99 | |||
| 252727 | 5 | Backrest Frame | $82.99 | |||
| 252730 | 6 | Pivot Bracket | $116.49 | |||
| 303463 | 7 | Adjustable Backrest | $101.49 | |||
 | 208378 | 9 | FOAM PAD | $28.99 | ||
| 252425 | 10 | PAD TUBE | $23.99 | |||
 | 239042 | 11 | PAD CAP | $3.99 | ||
| 252930 | 12 | 50MM ROUND OUTER CAP | NLA | |||
| 110913 | 13 | 50MM SQUARE INT ENDCAP | $1.99 | |||
| 150514 | 14 | 45MM SQUARE INT ENDCAP | $2.99 | |||
| 126329 | 15 | 25MM X 50MM INT ENDCAP | $2.99 | |||
| 132889 | 16 | M10 X 63MM BOLT | $12.99 | |||
| 225399 | 17 | M6 X 60MM BOLT | $3.49 | |||
| 164086 | 18 | M10 X 65MM CARRIAGE BOLT | $13.99 | |||
 | 148710 | 19 | M10 NUT | $2.49 | ||
| 140206 | 20 | M10 FLAT WASHER | $1.99 | |||
 | 252931 | 21 | LOCKING PIN | $34.99 | ||
 | 014063 | 22 | 1/4″ FLAT WASHER | $0.99 | ||
| 194587 | 23 | M10 X 85MM BOLT | $12.49 | |||
| 140208 | 24 | M6 X 16MM SCREW | $3.49 | |||
 | 373258 | 25 | M10 X 20MM HEX SCREW | $5.49 | ||
| 132651 | 26 | M10 X 70MM BOLT | $15.99 | |||
 | 014132 | 27 | IDLER ARM WASHER | $0.99 | ||
 | 195562 | 28 | M4 X 16MM SCREW | $1.99 | ||
 | 104838 | # | LUBE GREASE | $8.49 | ||
| 199570 | # | EXERCISE CHART | $6.49 | |||
| 304580 | # | DECAL,GENERAL WRNG,ENG/SP | $1.99 | |||
| 267065 | # | DECAL, MAX WEIGHT, FCA | $6.49 | |||
| 253090 | # | DECAL,GENERAL WARNING,FCA | $33.49 | |||
| 344414 | # | DECAL,MAX WEIGHT,ARABIC | $3.99 |
