Weider Pro 260 Bench – 15609.0 / 156090
Click on the part / diagram number to view and add to cart.
If the number does not highlight please check the table below the diagram to see if your part is listed. All parts in the table should have a corresponding diagram number. If your part is not listed at all please Click Here
49 Parts Available for Weider Pro 260 Bench - 15609.0 / 156090 ↓
| Image | Part # | Diagram # | Title | Price | Details | |
|---|---|---|---|---|---|---|
| 231050 | 1 | Bench Frame | $115.49 | |||
| 231064 | 5 | RIGHT UPRIGHT | $82.99 | |||
| 231049 | 6 | Left Upright | $106.49 | |||
| 231045 | 8 | LAT TOWER | $113.49 | |||
| 231047 | 9 | WEIGHT CARRIAGE | $37.99 | |||
| 231052 | 10 | Backrest Bracket | $91.99 | |||
| 231044 | 11 | CURL POST | $45.49 | |||
| 199508 | 12 | Adjustable Backrest Tube | NLA | |||
| 231042 | 13 | Adjustable Backrest | NLA | |||
| 231041 | 14 | SEAT | ||||
| 231043 | 15 | Curl Pad | NLA | |||
| 199685 | 16 | WEIGHT TUBE | NLA | |||
| 231046 | 17 | Lat Bar | $111.49 | |||
| 220902 | 18 | Join Plate | $45.49 | |||
| 163105 | 19 | PAD TUBE | $23.49 | |||
 | 208378 | 20 | FOAM PAD | $28.99 | ||
 | 162910 | 21 | 50MM SQUARE INNER CAP | $11.99 | ||
| 229436 | 24 | Lat Tower Bushing | $5.49 | |||
| 199532 | 25 | Adjustment Pin | NLA | |||
| 150514 | 26 | 45MM SQUARE INT ENDCAP | $2.99 | |||
| 234707 | 27 | 25MM X 51MM INNER CAP | NLA | |||
| 123396 | 28 | 25MM ROUND ANGLED CAP | $2.49 | |||
| 186253 | 29 | CONSOLE FRAME CAP | $1.99 | |||
| 112560 | 30 | HANDGRIP | $2.99 | |||
| 184438 | 31 | WHEEL SPACER | $3.49 | |||
| 166048 | 32 | SPACER | NLA | |||
 | 120733 | 33 | 1″ RND INT ENDCAP | $2.49 | ||
 | 140950 | 34 | LONG KNOB | $28.99 | ||
| 199527 | 36 | SPRING CLIP | $10.99 | |||
| 115383 | 37 | CABLE CLIP | $26.99 | |||
 | 226917 | 38 | 90MM PULLEY | $80.99 | ||
| 137337 | 39 | M6 X 16MM PAN HEAD SCREW | $3.49 | |||
| 193237 | 40 | M10 X 65MM BOLT | $10.99 | |||
| 130302 | 41 | M10 X 81MM BOLT | $26.49 | |||
| 130287 | 42 | M10 X 75MM SCREW | $15.99 | |||
 | 148710 | 43 | M10 LOCKNUT | $2.49 | ||
 | 014132 | 44 | M10 FLAT WASHER | $0.99 | ||
| 184369 | 45 | TABLET HOLDER SCREW | $0.99 | |||
| 115366 | 46 | 3/4″ RND INT ENDCAP | $0.99 | |||
| 192210 | 47 | M10 X 60MM BOLT | $6.49 | |||
 | 014063 | 48 | ISOLATOR WASHER | $0.99 | ||
| 135575 | 49 | M6 X 38MM BOLT | $7.49 | |||
| 195923 | 50 | M10 X 168MM BOLT | NLA | |||
 | 012142 | 51 | M6 NYLON LOCKNUT | $0.99 | ||
 | 195203 | 52 | M8 X 58MM BOLT | $5.99 | ||
| 207069 | 53 | M10 X 19MM BOLT | $4.99 | |||
| 144781 | 54 | M10 X 68MM SCREW | $15.99 | |||
 | 012042 | 55 | M8 LOCKNUT | $1.99 | ||
| 014073 | 56 | CRANK WASHER | $1.49 |
