Weider Pro 136 Bench – WEBE8889.0 / WEBE88890
Click on the part / diagram number to view and add to cart.
If the number does not highlight please check the table below the diagram to see if your part is listed. All parts in the table should have a corresponding diagram number. If your part is not listed at all please Click Here
32 Parts Available for Weider Pro 136 Bench - WEBE8889.0 / WEBE88890 ↓
| Image | Part # | Diagram # | Title | Price | Details | |
|---|---|---|---|---|---|---|
| 156842 | 5 | TUBE,BKRST,1″SQX31″L | $60.99 | |||
| 132653 | 9 | M10 X 127mm Bolt | NLA | |||
| 156712 | 14 | Rectangular Plate 1.5×4.0 | $17.49 | |||
| 156749 | 16 | SPPRT,WT REST,STGRY | $44.99 | |||
| 014073 | 17 | 5/16″ FLAT WASHER | $1.49 | |||
| 120696 | 18 | UPRIGHT CAP | $4.49 | |||
 | 149651 | 20 | KNOB | $28.99 | ||
 | 120733 | 21 | 1″ RND INT ENDCAP | $2.49 | ||
| 140239 | 22 | FOAM PAD | $24.99 | |||
| 140208 | 24 | M6 X 16MM SCREW | $3.49 | |||
| 013265 | 25 | C-Magnet Bolt | NLA | |||
| 132651 | 26 | M10 X 70MM BOLT | $15.99 | |||
 | 013373 | 27 | M8 X 40MM BOLT | $6.49 | ||
| 156716 | 28 | TUBE,RND,.75X12.5X16GA | $22.99 | |||
 | 014132 | 29 | IDLER ARM WASHER | $0.99 | ||
 | 148710 | 30 | M10 NUT | $2.49 | ||
| 103833 | 32 | BASE ENDCAP | $3.49 | |||
| 115366 | 33 | 3/4″ RND INT ENDCAP | $0.99 | |||
 | 012042 | 34 | M8 NYLON LOCKNUT | $1.99 | ||
| 152125 | 35 | M10 X 50MM BOLT | $14.49 | |||
| 110913 | 36 | 50MM SQUARE INT ENDCAP | $1.99 | |||
 | 103087 | 37 | CLIP | $20.99 | ||
| 163633 | 39 | 90MM PULLEY | $80.99 | |||
 | 143843 | 43 | PLASTIC BUSHING | $24.99 | ||
| 013074 | 44 | M8 X 50MM HEX BOLT | $8.99 | |||
| 122321 | 45 | SPRING COLLAR | $20.99 | |||
| 112560 | 49 | HANDGRIP | $2.99 | |||
| 150514 | 50 | 45MM SQUARE INT ENDCAP | $2.99 |
