Weider 200 Power Tower Bench – WEBM0918.0 / WEBM09180
Click on the part / diagram number to view and add to cart.
If the number does not highlight please check the table below the diagram to see if your part is listed. All parts in the table should have a corresponding diagram number. If your part is not listed at all please Click Here
27 Parts Available for Weider 200 Power Tower Bench - WEBM0918.0 / WEBM09180 ↓
| Image | Part # | Diagram # | Title | Price | Details | |
|---|---|---|---|---|---|---|
| 214350 | 4 | SPPRT,UPRT,SNDBK | $132.49 | |||
| 214351 | 5 | HANDLE,DIP STATION,SNDBK | $107.49 | |||
| 214353 | 6 | Rectangular Pad | NLA | Unavailable to order | ||
| 214348 | 7 | CRSMBR,TOP,VKR,SNDBK | $135.99 | |||
| 214352 | 8 | Rectangular Pad | NLA | Unavailable to order | ||
| 214702 | 9 | Foam Pull-Up Bar | NLA | Unavailable to order | ||
| 274324 | 10 | CRSMBR,LOWER,ARPS,INTL,W/DECAL | $101.49 | |||
| 214474 | 11 | SHORT FOAM GRIP | $27.49 | |||
| 214465 | 12 | ENDCAP,INT,RND,CUSTOM | $4.99 | |||
| 214881 | 13 | BKT,SADDLE,2.5X5.88″ P01335C | NLA | Unavailable to order | ||
 | 163342 | 14 | HANDLEBAR ENDCAP | $4.99 | ||
| 214464 | 15 | ENDCAP,INT,2.5,DOMED | $5.49 | |||
| 214701 | 16 | Round 2.5 Inch Black End Cap | NLA | Unavailable to order | ||
 | 362260 | 16 | STABILIZER CAP | $5.99 | Unavailable to order | |
| 220683 | 17 | M8 X 75MM SCREW | $8.49 | |||
 | 207051 | 18 | M6 x 72mm Screw | $4.49 | ||
| 152125 | 19 | M10 X 50MM BOLT | $14.49 | |||
| 212519 | 20 | M8 X 68MM CARRIAGE BOLT | $8.49 | |||
 | 014063 | 21 | 1/4″ FLAT WASHER | $0.99 | ||
 | 012042 | 22 | M8 LOCKNUT | $1.99 | ||
| 212520 | 24 | M8 X 68MM BOLT | $5.99 | |||
| 214475 | 25 | Foam Pad 0.941″ x 1.22″ x 20″ for Part Number 214474A | $30.49 | |||
 | 014132 | 26 | 3/8″ WASHER | $0.99 | ||
 | 137337 | 27 | M6 X 16MM SCREW | $3.49 | ||
| 220684 | 28 | M8 X 77mm Bolt | NLA | Unavailable to order |
